Browsing by Author "Paque, F."

Aim To compare various parameters of root canal preparation using RaCe (FKG Dentaire, La-Chaux-de-Fonds, Switzerland) and ProTaper (Dentsply Maillefer, Ballaigues, Switzerland) nickel-titanium (Ni-Ti) instruments. Methodology Fifty extracted mandibular molars with mesial root canal curvatures between 20degrees and 40degrees were embedded in a muffle system. All root canals were prepared to size 30 using RaCe or ProTaper rotary instruments in low-torque motors with torque control and constant speed of 300 r.p.m. (ProTaper with ATR Tecnika, Advanced Technology Research, Pistoia, Italy; RaCe with EndoStepper, S.E.T., Olching, Germany). In both groups irrigation was performed with 2 mL NaOCl (3%) after each instrument size. Calcinase-Slide (lege artis, Dettenhausen, Germany) was used as a chelating agent with each instrument. The following parameters were evaluated: straightening of curved root canals, postoperative root canal cross-sections, safety issues and working time. Cleanliness of the root canal walls was investigated under the SEM using 5-score indices for debris and smear layer. Statistical analysis was performed using the following tests: Wilcoxon's test for straightening and working time was used (P < 0.05); Fisher's exact test for comparison of cross-sections and root canal cleanliness (P < 0.05). Results Both Ni-Ti systems maintained curvature well; the mean degree of straightening was less than 1degrees for both systems. Following preparation with RaCe, 49% of the root canals had a round or oval diameter and 50% an irregular diameter, ProTaper preparations resulted in a round or oval diameter in 50% of the cases. For debris, RaCe and ProTaper achieved 47 and 49% scores of 1 and 2, respectively; there was no significant difference. For smear layer, RaCe and ProTaper achieved 51 and 33% scores 1 and 2, respectively; no statistically significant differences were apparent for the coronal and middle sections of the root canals, but RaCe performed significantly better in the apical region (Fisher's exact test, P = 0.0392). Two roots lost working length with RaCe instruments, whilst ProTaper preparation resulted in two roots loosing working length and one fractured instrument. Mean working time was shorter for ProTaper (90.9 s) than for RaCe (137.6 s); the difference was significant (Wilcoxon's test, P = 0.011). Conclusions Both systems respected original root canal curvature well and were safe to use. Cleanliness was not satisfactory for both systems.

Aim of the in situ-study was to evaluate fluoride retention in sound and demineralised enamel after application of a novel water-based fluoride (0.12 % F) varnish Mirafluorid (Hager Et Werken, Germany) compared to the resin-based varnish (2.26 % F) Duraphat (Colgate, USA). Each five enamel specimens were prepared from 60 bovine incisors. In 150 of these specimens, incipient lesions were produced with acidic hydroxyethyl cellulose (pH 4.8; 72 h), 150 specimens were not demineralised. The samples were equally (n = 100) allotted to three groups (A: Mirafluord, B: Duraphat, and C: control). Each 80 specimens (40 demineralised and 40 sound) were varnished with either Mirafluorid or Duraphat or remained unfluoridated (controls). The other specimens were used for measuring base-tine fluoride content of the respective tooth. Each six specimens (three demineralised and three sound) were fixed in intraoral appliances worn for 5 days by 10 volunteers in three series (A-C). During the experiment, the samples were brushed twice daily with fluoridated toothpaste. KOH-soluble and structurally bound fluoride (0-30 and 31-60 mu m depth) was determined immediately, 1, 3 and 5 days after fluoridation. Fluoride uptake was calculated as compared to base-line content and statistically analysed. Immediately after fluoridation, uptake of KOH-soluble and structurally bound fluoride was similar for Mirafluorid and Duraphat in both demineralised and sound enamel. However, at day 1, 3 and 5 statistically significantly higher amounts of KOH-soluble and structurally bound fluoride were found in the samples treated with Duraphat. For Mirafluorid only the uptake for KOH-soluble fluoride and structurally bound fluoride in the first enamel layer (0-30 mu m) of the demineralised samples was significantly higher compared to the controls (C). It is concluded that the novel fluoride varnish Mirafluorid deposits less KOH-soluble and structurally bound fluoride on both demineralised and sound enamel compared to Duraphat under in situ-conditions. (c) 2004 Elsevier Ltd. All rights reserved.

Internal bleaching procedures such as the walking bleach technique can be used for whitening of discoloured root-filled teeth. The walking bleach technique is performed by application of a paste consisting of sodium perborate- (tetrahydrate) and distilled water (3% H2O2), respectively, in the pulp chamber. Following a critical review of the scientific literature, heating of the mixture is contra-indicated as the risk of external cervical resorption and the formation of chemical radicals is increased by application of heat. An intracoronal dressing using 30% H2O2 should not be used in order to reduce the risk of inducing cervical resorption. This review provides advice based on the current literature and discusses how the walking bleach technique can lead to successful whitening of non-vital root-filled teeth without the risks of side-effects.